Moonlit Meadow Bunny Amigurumi Free Pattern – Crochet Velvet Plush with Starry Embroidery

Welcome to a world of dreamy celestial charm! Today, we're crafting the Moonlit Meadow Bunny—a soft, huggable amigurumi companion that combines the cozy texture of velvet yarn with whimsical starry embroidery. This beginner-friendly pattern is perfect for gifting, nursery decor, or simply adding a touch of magic to your handmade collection. With its floppy ears, cream belly patch, and delicate gold stars, this bunny is sure to become a treasured keepsake.

Whether you're new to amigurumi or a seasoned crocheter looking for a relaxing project, this pattern offers clear instructions and satisfying results. Let's gather our materials and bring this celestial bunny to life!

Materials Needed

Before we begin, let's ensure you have everything ready. The beauty of this project lies in its simplicity—just a few supplies and a little patience will yield a stunning result.

Yarn Requirements

• Dusty lavender velvet/chenille yarn – approximately 150g (main color for head, body, ears, arms, legs)
• Cream velvet/chenille yarn – approximately 50g (for belly patch and tail)
• Soft gold yarn – small amount for embroidery (stars and crescent moon)

Tools & Notions

• 4.0 mm crochet hook (or size needed to achieve tight stitches)
• 10mm safety eyes (or embroidered eyes as an alternative)
• Polyester fiberfill stuffing
• Yarn needle for sewing and embroidery
• Stitch marker to track rounds
• Scissors

Note on gauge: Gauge is not critical for amigurumi, but aim for tight stitches to prevent stuffing from showing through the velvet yarn. If your stitches are too loose, try a smaller hook.

Step-by-Step Instructions

Let's dive into the pattern! We'll work through each part systematically, starting with the head and working our way down. Remember to use a stitch marker to keep track of your rounds, and don't hesitate to pause and review if needed.

Abbreviations (US Terms)

• MR: magic ring
• sc: single crochet
• inc: increase (2 sc in same stitch)
• dec: decrease (invisible decrease recommended)
• sl st: slip stitch
• ch: chain
• st(s): stitch(es)

Head (Lavender)

The head is worked in continuous rounds. Take your time with the increases and decreases—they shape the bunny's adorable face.

1. Round 1: MR, 6 sc (6 sts)
2. Round 2: inc around (12 sts)
3. Round 3: (sc, inc) around (18 sts)
4. Round 4: (2 sc, inc) around (24 sts)
5. Round 5: (3 sc, inc) around (30 sts)
6. Round 6: (4 sc, inc) around (36 sts)
7. Rounds 7-12: sc around (36 sts) – 6 rounds even
8. Round 13: (5 sc, inc) around (42 sts)
9. Rounds 14-16: sc around (42 sts) – 3 rounds even
10. Round 17: (5 sc, dec) around (36 sts)
11. Round 18: (4 sc, dec) around (30 sts)
12. Round 19: (3 sc, dec) around (24 sts)

Important: Insert safety eyes between rounds 12 and 13, approximately 6 stitches apart. Position them so they sit symmetrically on the face. Stuff the head firmly with fiberfill before continuing.

20. Round 20: (2 sc, dec) around (18 sts)
21. Round 21: (sc, dec) around (12 sts)
22. Round 22: dec around (6 sts)

Fasten off and weave in the end securely. Set the head aside.

Body (Lavender)

The body is slightly wider at the bottom to create a stable, sitting bunny. Follow the increases carefully.

1. Round 1: MR, 6 sc (6 sts)
2. Round 2: inc around (12 sts)
3. Round 3: (sc, inc) around (18 sts)
4. Round 4: (2 sc, inc) around (24 sts)
5. Round 5: (3 sc, inc) around (30 sts)
6. Round 6: (4 sc, inc) around (36 sts)
7. Rounds 7-12: sc around (36 sts) – 6 rounds even
8. Round 13: (4 sc, dec) around (30 sts)
9. Round 14: (3 sc, dec) around (24 sts)
10. Round 15: (2 sc, dec) around (18 sts)

Stuff the body firmly with fiberfill, shaping it as you go.

16. Round 16: (sc, dec) around (12 sts)
17. Round 17: dec around (6 sts)

Fasten off, leaving a long tail (approximately 20 cm) for sewing the body to the head.

Ears (Make 2, Lavender)

These floppy ears give the bunny its signature dreamy look. Do not stuff them—they should remain flat and flexible.

1. Round 1: MR, 6 sc (6 sts)
2. Round 2: inc around (12 sts)
3. Round 3: (sc, inc) around (18 sts)
4. Rounds 4-8: sc around (18 sts) – 5 rounds even
5. Round 9: (sc, dec) around (12 sts)
6. Rounds 10-12: sc around (12 sts) – 3 rounds even
7. Round 13: dec around (6 sts)

Fasten off, leaving a long tail for sewing. Flatten each ear and sew them to the top of the head, positioning them slightly to the sides so they droop naturally.

Arms (Make 2, Lavender)

These small, stubby arms are lightly stuffed to maintain their shape.

1. Round 1: MR, 6 sc (6 sts)
2. Round 2: inc around (12 sts)
3. Rounds 3-5: sc around (12 sts) – 3 rounds even
4. Round 6: (sc, dec) around (8 sts)
5. Rounds 7-10: sc around (8 sts) – 4 rounds even

Stuff lightly, fasten off, and leave a long tail. Sew the arms to the sides of the body, positioning them slightly forward for a cute, huggable pose.

Legs (Make 2, Lavender)

The legs are sturdier to support the bunny in a sitting position. Stuff them firmly.

1. Round 1: MR, 6 sc (6 sts)
2. Round 2: inc around (12 sts)
3. Round 3: (sc, inc) around (18 sts)
4. Rounds 4-6: sc around (18 sts) – 3 rounds even
5. Round 7: (sc, dec) around (12 sts)
6. Rounds 8-10: sc around (12 sts) – 3 rounds even

Stuff firmly, fasten off, and leave a long tail. Sew the legs to the bottom of the body, ensuring the bunny sits evenly.

Belly Patch (Cream)

This oval patch adds a lovely contrast to the lavender body.

1. Round 1: MR, 6 sc (6 sts)
2. Round 2: inc around (12 sts)
3. Round 3: (sc, inc) around (18 sts)
4. Round 4: (2 sc, inc) around (24 sts)
5. Round 5: (3 sc, inc) around (30 sts)

Fasten off, leaving a long tail. Sew the patch onto the front of the body, centered between the arms. Weave in the end securely.

Tail (Cream)

A small, fluffy tail completes the bunny's silhouette.

1. Round 1: MR, 6 sc (6 sts)
2. Round 2: inc around (12 sts)
3. Round 3: sc around (12 sts) – 1 round even
4. Round 4: dec around (6 sts)

Stuff lightly, fasten off, and sew to the back of the body at the lower edge.

Embroidery (Soft Gold)

This is where the magic happens! Using soft gold yarn and a yarn needle, create delicate celestial details.

• Stars: Using straight stitches radiating from a center point, embroider small stars scattered across the belly patch. Add a few on the ears for extra charm.
• Crescent Moon: Embroider a tiny crescent moon on the forehead using a series of small, curved stitches.

Tip: Keep your stitches small and even for a polished look. If you're new to embroidery, practice on a scrap piece of yarn first.

Assembly

Now it's time to bring your bunny together!

1. Sew the head to the body: Use the long tail left on the body to whipstitch the head securely to the top of the body. Ensure the seam is hidden and the head sits upright.
2. Attach the ears: Position them on the top of the head, slightly to the sides, and sew them in place using the long tails. Let them flop naturally.
3. Sew the arms and legs: Attach them as described in their respective sections, using the long tails. Ensure they are securely fastened.
4. Weave in all ends: Use your yarn needle to hide any remaining tails inside the bunny.
5. Optional blush: Add a small amount of pink yarn or fabric paint to the cheeks for a rosy, adorable glow.

Congratulations! Your Moonlit Meadow Bunny is complete. This dreamy companion is ready to bring celestial charm to any space. Whether you gift it to a loved one or keep it for yourself, the love and care you've stitched into every detail will shine through.

Happy crocheting, and may your nights be filled with moonlit meadows and starry dreams!