The Aurora Bloom Wall Hanging Free Pattern – A Crocheted Ombre Flower Tapestry with Woven Petal Accents

Transform your living space with this stunning crocheted wall hanging, featuring a cascade of ombre blossoms in sunset hues. Each petal is individually crafted and woven together, creating a dimensional piece that brings warmth and artistry to any room. This boho-chic tapestry is the perfect weekend project for crocheters of all levels—even beginners can achieve beautiful results with our detailed, step-by-step guidance.

Whether you're looking to add a handmade touch to your living room, bedroom, or entryway, the Aurora Bloom Wall Hanging delivers a striking visual impact. The textured ribbed background transitions through five warm shades—from cream to terracotta—while three-dimensional flowers cascade diagonally across the surface. Let's dive into this free pattern and create something truly special together.

Materials Needed

Before you begin, gather the following supplies. All items are readily available at your local craft store or online.

• Yarn: Worsted weight cotton yarn in 5 shades:
  • Cream (approx. 100g)
  • Blush pink (approx. 60g)
  • Coral (approx. 60g)
  • Peach (approx. 50g)
  • Terracotta (approx. 30g)
  Total: approximately 300g
• Crochet Hook: 5.0 mm (US H-8) crochet hook
• Tapestry Needle: For weaving in ends and sewing flowers
• Wooden Dowel: 12 inches long, approximately 0.5–0.75 inches in diameter
• Scissors
• Steam iron or spray bottle (for blocking, optional but recommended)

Gauge: 4 dc x 2 rows = 1 inch. Gauge is not critical for this project, but consistent tension is recommended for a polished final look.

Step-by-Step Instructions

This wall hanging is worked in two parts: the base tapestry and the individual flowers. The base is a simple rectangle with a textured stitch pattern, while the flowers are made separately and then attached. Follow along carefully, and you'll have a gorgeous piece in no time.

Part 1: Base Tapestry

The base tapestry measures approximately 9.5 inches wide by 13 inches tall. Worked in rows, it features alternating smooth and textured bands that create a beautiful ribbed effect.

Row 1: With cream yarn, ch 41. Dc in 4th ch from hook (the skipped 3 chains count as your first dc) and in each ch across. You should have 38 dc stitches total.

Row 2: Ch 3 (counts as dc), turn. Dc in each dc across. (38 dc)

Row 3: Ch 3, turn. *Dc in next 2 dc, fpdc (front post double crochet) around next dc* repeat from * to * across, ending with dc in last dc. (38 sts)

Note: To work a front post double crochet (fpdc), yarn over, insert your hook from front to back to front around the post of the indicated stitch, yarn over and pull up a loop, then complete the dc as usual. This creates a raised ridge on the front of your work.

Rows 4-6: Repeat Row 2.

Row 7: Ch 3, turn. *Dc in next 2 dc, bpdc (back post double crochet) around next dc* repeat from * to * across, ending with dc in last dc. (38 sts)

Note: Back post double crochet (bpdc) is worked the same way as fpdc, but you insert your hook from back to front to back around the post of the stitch. This creates a recessed ridge on the front of your work.

Rows 8-10: Repeat Row 2.

Row 11: Switch to blush pink yarn. Repeat Row 3 (the fpdc pattern).

Rows 12-14: Repeat Row 2.

Row 15: Switch to coral yarn. Repeat Row 7 (the bpdc pattern).

Rows 16-18: Repeat Row 2.

Row 19: Switch to peach yarn. Repeat Row 3 (the fpdc pattern).

Rows 20-22: Repeat Row 2.

Row 23: Switch to terracotta yarn. Repeat Row 7 (the bpdc pattern).

Rows 24-26: Repeat Row 2. Fasten off and weave in all ends with your tapestry needle.

Your base tapestry should now have five distinct color bands, each with a textured row in the middle. The cream section is at the top, followed by blush pink, coral, peach, and terracotta at the bottom.

Part 2: Flowers (Make 5)

Each flower is worked in the round, starting with a magic ring. You'll make 5 flowers total using this color sequence: 2 blush pink, 2 coral, and 1 peach. Each flower measures approximately 4 inches in diameter.

Round 1: With your chosen color, make a magic ring. Ch 3 (counts as dc), work 11 dc into the ring. Pull the tail to close the ring tightly. Join with a sl st to the top of the ch-3. (12 dc)

Round 2: Ch 3 (counts as dc), dc in same st (this creates an increase). Work 2 dc in each st around. Join with a sl st to the top of the ch-3. (24 dc)

Round 3: Ch 1, sc in same st. *Ch 5, skip 2 sts, sc in next st* repeat from * to * around, ending with ch 5, sl st to the first sc. You should have 8 ch-5 loops.

Round 4: Sl st into the first ch-5 loop. *Ch 1, sc in loop, ch 3, 3 dc in loop, ch 3, sc in loop* repeat from * to * for each of the 8 loops. Join with a sl st to the first sc. Fasten off, leaving a long tail (approximately 12 inches) for sewing the flower to the tapestry.

Tip: When you fasten off, leave a generous tail. You'll use this to sew the flower securely to the base tapestry.

Repeat these steps to make all 5 flowers. Set them aside when complete.

Part 3: Assembly

Now it's time to bring your wall hanging together. This is where the magic happens!

Step 1: Arrange the Flowers
Lay your base tapestry flat with the right side facing up. Arrange the 5 flowers in a diagonal cascade from the top left corner to the bottom right corner. Place them approximately 2-3 inches apart, creating a gentle flowing line. Play with the placement until you're happy with the composition. A suggested arrangement: one flower near the top left (in the cream/blush area), one slightly lower and to the right (in the blush/coral area), one in the middle (in the coral/peach area), one lower right (in the peach/terracotta area), and one near the bottom right corner.

Step 2: Sew the Flowers
Using the long tails from each flower, thread your tapestry needle. Working from the back of the tapestry, bring the needle up through the base and into the back of the flower. Sew around the center of the flower, weaving the needle through the back loops of the flower's stitches and into the tapestry fabric. Make several passes to ensure the flower is securely attached. Weave the tail through the back of the work and trim any excess. Repeat for all 5 flowers.

Step 3: Create the Dowel Casing
Fold the top edge of the tapestry over the wooden dowel. The fold should be approximately 1 inch deep. Pin or clip in place. Using your tapestry needle and a length of cream yarn, sew the folded edge down, creating a casing for the dowel. Use a whip stitch or running stitch, making sure to catch both layers of fabric. Ensure the dowel is centered and slides easily within the casing.

Step 4: Add the Hanging Loop
Cut a 12-inch piece of cream yarn. Fold it in half to create a loop. Tie the folded end securely around one end of the dowel, then bring the two loose ends around the other side of the dowel and tie them together at the opposite end. This creates a simple hanging loop. Alternatively, you can tie one loop at each end of the dowel for a more balanced hang.

Step 5: Finishing Touches
Trim any loose ends and give your wall hanging a gentle steam block. Hold a steam iron about 2 inches above the piece (do not press directly) or lightly mist with water and allow to dry flat. This will flatten the flowers, even out the stitches, and give your piece a professional, polished look.

Tips for Success

• Consistent tension: Keep your tension even throughout the project. If you tend to crochet tightly, consider going up a hook size; if loosely, go down a size.
• Color transitions: When switching colors, fasten off the old color and weave in the end before starting the new color. This keeps the back of your work clean.
• Flower placement: Don't rush the arrangement. Step back and look at your tapestry from a distance to ensure the cascade looks balanced.
• Blocking: Steam blocking makes a huge difference in the final appearance. It helps the flowers lie flat and the stitches look uniform.

Customization Ideas

Once you've mastered the Aurora Bloom pattern, feel free to make it your own:

• Color variations: Swap the sunset palette for cool blues and greens, or go monochromatic for a modern look.
• Size adjustments: Add more rows to the base tapestry or make additional flowers for a larger piece.
• Different flowers: Experiment with different flower patterns or add leaves for extra dimension.

This crocheted wall hanging makes a wonderful gift for housewarmings, weddings, or simply as a treat for your own home. The combination of textured stitches and dimensional flowers creates a piece that looks far more complex than it actually is—perfect for impressing friends and family with your handmade skills.

We'd love to see your finished Aurora Bloom Wall Hanging! Share your creations on social media with the hashtag #AuroraBloomWallHanging and tag us so we can admire your work. Happy crocheting!