Frosted Forest Wreath Free Pattern – Crochet a Snowy Pinecone Garland

Bring the quiet magic of a winter woodland into your home with this textured crochet wreath, adorned with delicate pinecones and a dusting of snowy white. This pattern weaves together cozy bobbles and crisp ridges for a piece that feels both rustic and refined. Whether you're an experienced crocheter or a confident beginner looking for a festive challenge, this wreath will become a cherished handmade decoration for years to come.

The Frosted Forest Wreath is worked in two main parts: a plush, puffy base ring and adorable pinecone embellishments. The dense single crochet fabric creates a soft, cushiony circle that mimics the fullness of a fresh evergreen wreath, while the fluffy white bobble trim adds that perfect "just snowed" effect. With clear instructions and detailed steps, you'll be hanging this beauty on your door before you know it.

Materials Needed

Before you begin, gather the following supplies. Having everything ready will make your crochet session smooth and enjoyable.

Yarn

• Color A (Forest Green): Worsted weight yarn, approximately 200g. This forms the main body of the wreath.
• Color B (Cream White): Worsted weight yarn, approximately 100g. Used for the snowy bobble trim and hanging loop.
• Color C (Warm Brown): Worsted weight yarn, approximately 50g. For the pinecone embellishments.

Hook and Notions

• Crochet Hook: 5.0 mm (H-8) crochet hook
• Fiberfill: Polyester stuffing for the wreath base and pinecones
• Yarn Needle: For weaving in ends and sewing pieces together
• Scissors: For cutting yarn
• Stitch Marker (optional): Helpful for keeping track of rounds

Gauge

4 inches = 16 stitches and 12 rows in single crochet. While gauge isn't critical for this project (since it's a decorative piece), maintaining consistent tension will ensure your wreath is even and professional-looking.

Step-by-Step Instructions

This wreath is worked in two main parts: the base ring and the pinecone embellishments. The base is crocheted in a continuous spiral, then the pinecones are attached. Follow each section carefully, and you'll have a stunning finished piece.

Base Ring (Make 2 Identical Pieces, Then Join)

You'll be making two identical flat circles, which will then be joined together to create a plush, stuffed wreath. Work each circle in a continuous spiral—do not join at the end of rounds unless specified.

Round 1: With color A, make a magic ring. Work 6 sc into the ring. Pull tight. (6 sts)

Round 2: 2 sc in each st around. (12 sts)

Round 3: *Sc in next st, 2 sc in next st* repeat around. (18 sts)

Round 4: *Sc in next 2 sts, 2 sc in next st* repeat around. (24 sts)

Round 5: *Sc in next 3 sts, 2 sc in next st* repeat around. (30 sts)

Round 6: *Sc in next 4 sts, 2 sc in next st* repeat around. (36 sts)

Round 7: *Sc in next 5 sts, 2 sc in next st* repeat around. (42 sts)

Round 8: *Sc in next 6 sts, 2 sc in next st* repeat around. (48 sts)

Round 9: *Sc in next 7 sts, 2 sc in next st* repeat around. (54 sts)

Round 10: *Sc in next 8 sts, 2 sc in next st* repeat around. (60 sts)

Round 11: *Sc in next 9 sts, 2 sc in next st* repeat around. (66 sts)

Round 12: *Sc in next 10 sts, 2 sc in next st* repeat around. (72 sts)

Round 13: *Sc in next 11 sts, 2 sc in next st* repeat around. (78 sts)

Round 14: *Sc in next 12 sts, 2 sc in next st* repeat around. (84 sts)

Round 15: *Sc in next 13 sts, 2 sc in next st* repeat around. (90 sts)

Round 16: *Sc in next 14 sts, 2 sc in next st* repeat around. (96 sts)

Round 17: *Sc in next 15 sts, 2 sc in next st* repeat around. (102 sts)

Round 18: *Sc in next 16 sts, 2 sc in next st* repeat around. (108 sts)

Round 19: *Sc in next 17 sts, 2 sc in next st* repeat around. (114 sts)

Round 20: *Sc in next 18 sts, 2 sc in next st* repeat around. (120 sts)

Round 21: *Sc in next 19 sts, 2 sc in next st* repeat around. (126 sts)

Round 22: *Sc in next 20 sts, 2 sc in next st* repeat around. (132 sts)

Round 23: *Sc in next 21 sts, 2 sc in next st* repeat around. (138 sts)

Round 24: *Sc in next 22 sts, 2 sc in next st* repeat around. (144 sts)

Round 25: *Sc in next 23 sts, 2 sc in next st* repeat around. (150 sts)

Round 26: *Sc in next 24 sts, 2 sc in next st* repeat around. (156 sts)

Round 27: *Sc in next 25 sts, 2 sc in next st* repeat around. (162 sts)

Round 28: *Sc in next 26 sts, 2 sc in next st* repeat around. (168 sts)

Round 29: *Sc in next 27 sts, 2 sc in next st* repeat around. (174 sts)

Round 30: *Sc in next 28 sts, 2 sc in next st* repeat around. (180 sts)

Fasten off and weave in ends. Make a second identical piece.

Joining the Base

Now it's time to transform your two flat circles into a plush, three-dimensional wreath.

Step 1: Place the two circles together with wrong sides facing. The right sides (the nicer-looking sides) should be facing outward.

Step 2: Using color A, single crochet through both layers around the outer edge. Insert your hook through the front loop of the back circle and the corresponding loop of the front circle, working them together as one.

Step 3: Continue single crocheting around the entire circumference, but leave a 4-inch opening when you're about three-quarters of the way around.

Step 4: Stuff the wreath lightly with fiberfill through the opening. You want it to be plush and puffy, but not overly firm—it should still feel soft and squishy. Distribute the stuffing evenly as you go.

Step 5: Continue single crocheting to close the opening, working through both layers as before.

Step 6: Join with a slip stitch to the first sc. Fasten off and weave in ends.

Pinecone Embellishments (Make 5)

These adorable pinecones add the perfect woodland touch. The back-loop-only round creates the textured scale effect.

Round 1: Using color C, make a magic ring. Work 6 sc in ring. (6 sts)

Round 2: (Sc in next st, 2 sc in next st) repeat around. (9 sts)

Round 3: (Sc in next 2 sts, 2 sc in next st) repeat around. (12 sts)

Round 4: (Sc in next 3 sts, 2 sc in next st) repeat around. (15 sts)

Round 5: (Sc in next 4 sts, 2 sc in next st) repeat around. (18 sts)

Round 6: Working in back loops only, sc in each st around. (18 sts) — This creates the ridge that mimics pinecone scales.

Round 7: (Sc in next 2 sts, sc2tog) repeat around. (12 sts) — sc2tog = single crochet two stitches together (a decrease)

Round 8: (Sc in next st, sc2tog) repeat around. (8 sts)

Round 9: Sc2tog around. (4 sts)

Fasten off, leaving a long tail (at least 12 inches). Stuff the pinecone lightly with fiberfill before closing. Pull the tail through the remaining stitches and cinch closed. Weave in ends.

Snowy Bobble Trim

This is where the magic happens! The fluffy white bobble trim transforms your green wreath into a frosted winter wonderland.

Step 1: With color B, attach yarn to the outer edge of the wreath with a slip stitch.

Step 2: *Work a bobble stitch in the next st, sc in next 2 sts* repeat around the entire outer edge.

Bobble Stitch Tutorial: A bobble stitch is worked as follows: Yarn over, insert hook into the stitch, yarn over and pull up a loop, yarn over and pull through two loops (this is a half-finished double crochet). Repeat this three more times in the same stitch (you'll have 4 half-finished dc on your hook). Yarn over and pull through all 5 loops on your hook. This creates a puffy, rounded bump.

Step 3: Continue the *bobble, sc in next 2 sts* pattern all the way around the wreath's outer edge. This creates a fluffy, snowy border.

Step 4: Join with a slip stitch, fasten off, and weave in ends.

Assembly

Now for the final touches that bring everything together.

Step 1: Sew the pinecones evenly around the front of the wreath using the long tails you left when fastening off. Space them roughly equally—imagine a clock face and place them at approximately 12, 3, 6, and 9 o'clock positions, with the fifth one centered between two of them.

Step 2: Add a loop of color B at the top for hanging. Cut a length of yarn about 12 inches long, fold it in half, and thread the ends through the top of the wreath. Tie securely and weave in the ends.

Step 3: Give your wreath a final fluff and shape. Gently pull the bobbles outward and arrange the pinecones so they sit nicely.

Tips for Perfect Results

• Keep consistent tension: This ensures your circles lay flat and your wreath is even.
• Use a stitch marker: Since you're working in a spiral, it's easy to lose your place. Mark the first stitch of each round.
• Don't overstuff: The wreath should be plush but still soft enough to feel cozy. Overstuffing can distort the shape.
• Block if needed: If your circles curl at the edges, a gentle steam blocking can help them lay flat.

Creative Variations

Once you've mastered the Frosted Forest Wreath, feel free to make it your own:

• Color swaps: Try a deep burgundy base with cream trim for a richer look, or a soft sage green for a more muted aesthetic.
• Add berries: Crochet small red or gold berries to scatter between the pinecones for extra festive flair.
• Different trims: Instead of bobbles, try a picot edge or scalloped border for a different texture.
• Mini version: Use lighter yarn and a smaller hook to create a mini wreath for ornaments or gift toppers.

This Frosted Forest Wreath is more than just a decoration—it's a piece of handmade warmth that will welcome guests throughout the holiday season. The combination of plush green, snowy white, and textured brown creates a natural, woodland aesthetic that works beautifully on doors, walls, or as a centerpiece base. Happy crocheting, and may your home be filled with the cozy magic of a winter forest!

---